ONOSOKKICounter for displacement sensor DG-2310DG-2310 is a 2-channel multifunctional counter used with digital displacement sensors (BS/GS series) for dimension or displacement measurement. It can perform addition and subtraction calculations between 2 input channels (A+B, A-B), and has various calculation processing functions such as maximum value, minimum value, range value, etc. It also has a comparison function for qualified judgment and an alarm function. It has a variety of signal output functions and can be connected to a program controller, computer, or recorder for data output, which is convenient for recording and management of measurement data. Display method Main display: Polarity (-), digital 6-digit red LED Sub-display: LCD 16 characters x 2 lines Comparison result display: UPPER (red), GOOD (green), LOWER (red) Applicable to GS, BS series digital displacement sensors (not compatible with GS-3800 series) Input signal 90° phase difference signal (square wave) DC ~ 100 kHz External control input signal Input signal form: Voltage input, no-voltage contact Input signal type: Reset, peak hold, hold, key lock BCD input and output signal Output signal (BCD, polarity, comparison result, error): Open collector output (withstand voltage: MAX 30 V) Input signal (reset, hold): Voltage (Hi +4 ~ +5.25 V, Lo 0 ~ +1 V) Analog output signal 0 ~ ±10 V/FS (FS can be set arbitrarily), conversion method: 12-bit D/A, update time 10 ms or less RS-232C communication baud rate: 2400/4800/9600 bps Comparison result output setting range: 0 to ±999999 Output item: LOWER/GOOD/UPPER Output form: Semiconductor relay (1 contact each) Output capacity: DC 30 V 0.1 A, update time within 10 ms Calculation function A+B, A-B, A, B Peak hold function Maximum value, minimum value, maximum difference range value (maximum value - minimum value) Offset setting function range: 0 to ±999999 Resolution: 0.5 μm, 1 μm, 10 μm, 3 types in total